Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort. The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort. The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort. Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control. Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger. - Unidirectional carbon—-ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
- Traditional BMX handlebar design - For single-bolt BMX stems - Chrome-plated - Clamp Size: 1-inch - Width: 22.5-inch - Rise: 6-inch - Material: Steel
- Butted full chromoly construction - Lightweight design - Clamp Size: 7/8-inch - Width: 27.1-inch - Rise/Reach: 8.25-inch - Upsweep/Drop: 3° - Material: Chromoly
The Bontrager Comp VR-S road bar offers a shorter drop and reach, while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints. - Custom-butted, 6061-T6 alloy construction - Variable Radius-Short (VR-S) bar shape features a shallow drop with shorter reach, optimized for riders who prefer a less aggressive posture - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance. Integrated Comfort Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit. Product details - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
Goodbye, chatter Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit. Product details - Custom-butted, 6066-T6 alloy construction - Confidently access brake levers while in the drops with our VR-SF shallow, flared drop and shorter reach design - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
- Straight-gauge 6061-T6 aluminum construction - Purebred classic track bar with an updated 31.8mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - Matte black with silver/white graphics - 280g @ 42cm: drop/reach are measured center-to-center, width is measured outside-to-outside
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
Guinness World Record Holder Cameron Zink leaves a lasting impression anywhere he goes. In honor of his style and attitude, our signature Cam Zink handlebar is certainly not easy to miss! The CZ38 SPECIAL is dedicated to the hard-hitting, jaw-dropping standards that Cam pushes in our sport on a daily basis. Featuring Cam's favorite bend/backsweep and upsweep of 9.5 x 4.5 degrees in a 38mm rise and 760mm width, you have the opportunity to ride the exact same bar he puts through the paces on a daily basis. This is the perfect partnership to deliver the feel Cam loves with the strength DEITY is known for. - Designed for all disciplines from All Mountain, Downhill, Freeride, Trails, and more - Featuring our proprietary Gradient Butting Technology - Designed exclusively with Deity tooling - Made from custom gradient butted 7075 T73 aluminum - 760mm length (30 inch) - 38mm rise - 9.5 degree bend x 4.5 degree upsweep - 31.8mm clamping diameter - Weight: 310 grams
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)
Standard (15-degree) sweep in multiple heights to tailor rider's position. - Straight-gauge aluminum general-purpose riser bars (not intended for downhill riding) - May come in OEM packaging - Bar Clamp Diameter (mm): 25.4 - Material: Aluminum - Rise: 30mm, 60mm, 100mm - Width: 620mm
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - Zero-Rise
A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center
These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
A purpose-built carbon drop bar specifically designed to improve the off-road drop bar ride experience. Whether it’s descending the steep and technical grades at the Crusher in the Tushar, finding more comfortable hand positions during the 200-mile slog across Kansas at the Dirty Kanza, or adventure riding in your own backyard, this full carbon handlebar provides performance-driven gravel riders with the options, comfort, and control they need to grind gravel with confidence.
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 290 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Aluminum - Bar Top Style: Round
Page 1 of 6 Next page