Filter By:
Parts & Accessories

$8.99
- Mounts most AA flashlights to handlebars and helmets
- Ideal low-cost lighting alternative for cyclists

$2.99
Key features
- Reflector mount for first and second generation Speed Concept seatposts
- To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)

$5.00
Mount your Stix to either your handlebars or seatpost with this versatile Stix light mount with a flexible silicon strap.
- Works with handlebars and seatposts from 22.2mm up to 35mm in diameter.
- Second loop will fit most seatstay diameters.
- Mount only, light sold separately

$11.20
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

$19.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$9.99
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

$11.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$5.99
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride.
- Blendr mount allows for integrated rear light attachment
- Easily and securely mounts to compatible saddles
- Includes mounting hardware (2—3mm M5 bolt)
- Torque included M5 mounting hardware to 2Nm

$2.99
Product details:
- Replacement or extra mounts for all Bontrager Flare rear lights
- Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot
- Kit includes Flare light mount, two bases, and rubber strap adapters

$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$9.99
Key features:
- Securely attaches all Ion lights to bars
- Reduces vibration and slippage
- Compatible with 22.2-31.8mm diameter bars
- Mount rotates left and right for optimal placement

$6.99
Product details
- Compatible with USB rechargeable Flare taillights and all Ion headlights
- Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps
- Silicone body with a tooled adjustment clamp diameter
- When rotated for a Flare, the bracket is angled to compensate for an angled seat tube
- 25g

$4.99
Quick, easy straps for your Flare and Ion lights
Product details (Front - Ion)
- Fits all Ion headlights
- Works best with 22.2 - 35.0mm handlebars
Product details (Rear - Flare)
- Fits all Flare tail lights
- Works best with 27.2 - 31.6mm seatposts
- Includes 16 degree offset for optimized use on seatposts

$4.99
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g

$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long

$37.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride!
- Material: Forged aluminum / Engineering grade polymer
- Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma
- Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500
- Bracket: Fits 25.4 – 31.8mm handlebars (shims included)
- Max Load: 480g / 16.93oz
- Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase)
- Weight: 52g / 1.83oz
- Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"

$32.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices.
- Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount
- Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series
- Material: aluminum / fiberglass composite
- Max load: 220g
- Weight: 40g (120mm) / 45g (150mm)
- Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

$27.95
$40.00
30% Off
2amp charger for the fastest charging possible of Specialized Flux lights
- Has 2 standard size USB ports and will charge most USB devices.
- Includes 4 interchangeable wall plug options and USB A to USB MINI B male to male charge cable.
- Output: 10.5W 5V 2.1A Max Input: 100-204V AC 50/60Hz. 260mA

$17.45
$25.00
30% Off
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides.
- All the parts needed to mount a Flux Expert taillight to a second bike
- Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key.
- Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.

$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.

$6.95
$10.00
30% Off
High-efficiency charger cable for Flux headlights.
- High capacity wire can transfer more power with less loss.
- Custom "L" shaped Mini USB Male for the best fit to Flux headlights.
- NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.

$15.00
Replacement Battery – TSB-S Replacement Rechargeable Battery
- Battery: 1-Cell Li-Ion, 1400 mAh
- Fits: TSL-450F, TSL-700F

$6.00
Replacement Part – Aero Headlight Bracket
- Works For Both Headlights & Tail Lights
- 3 Strap Sizes Allows Fitting From 20mm To Over 100mm
- Adjusts To Fit Aero & Round Seat Posts & Handlebars
- Fits All Serfas Headlights Except: USL-200 & USL-450

$6.00
Replacement Part – Aero Tail Light Bracket
- Works For Both Headlight & Tail Lights
- Great For Helmet Application
- 3 Strap Sizes Allows Fitting From 20mm To Over 100mm
- Adjusts To Fit Aero & Round Seat Posts & Handlebars
Compatible With:
TST-70
TST-100
TST-150
TBT-50R
TBT-120F
Page 1 of 4
Next page