Parts

Replacement bearing for the lower half of YST8003 #7 headset.

- Routes cables underneath the bottom bracket - Will not rust or corrode

- 8x1mm Allen head

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- w/Nut - 1-3/4-inch

- Aluminum w/lock nut and mount - Slotted mount design

- Crown Race MX - Size: MX TH 26.4mm

Bar end plugs (2)

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- 50 feet (15.2 meters) length - 5mm diameter brake cable housing

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

FSA Standard Headset Bearings

FSA Mega Exo Small Parts.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

BB30 Spacer - 15.46mm

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- MTB or Road - 1.5 x 1855mm - Galvanized

• Compatible with most side pull and center pull brakes • All weather compound

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Flat head screws from Wheels Manufacturing.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

Shifting cables for Road/Mountain bikes.

- Steel cable noodle with alloy end caps - Includes plastic liner

Hope Brake Lever Parts

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

Complete remotes and remote components for KS dropper posts.

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- Standard steel replacement

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

- Sold in pairs - Allen wrench included

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound

Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.